Posts Tagged ‘sewing tutorial’

HSTLC tutorial photo

This is a brief tutorial I wrote up for my fellow members of the Love Circle of Do. Good Stitches to use to make this month’s blocks. I was playing around with this idea in a quilt I made recently, but modified it just a bit for a clearer result. These are the colors I used as inspiration for my blocks:

fabric colors for March

These instructions are for making two 12.5-inch blocks.


To make these blocks, you need four 7.5-inch squares, and four 7.5-inch log cabin blocks. To make just one 12.5-inch block, you would only need two each of the 7.5-inch squares and 7.5-inch log cabin blocks– but making 2 at once allows for mixing up the prints a bit.

I used 2 inch wide strips to make the log cabin blocks, which worked well for the size block I was going for. However, you can also vary the width of the “logs” in your log cabin for a more varied look! To start, I cut a number of 2 inch wide strips for making the log cabin blocks.


To make the log cabin blocks, start with a 2.5 inch square for the center (I just quartered a charm square for this step, but you can also use different fabrics for the centers). Then I added a 2.5 inch by 2 inch strip to both sides of the center square and pressed the seams. Next, I added the other 2 sides, and so on.



I added 2 rounds to each log cabin block, and ended up with blocks that look like this:


Once these were done, I trimmed them to 7.5 inch squares.

Next, I took my 7.5 inch blocks (the non-log cabin blocks) and drew a diagonal line down the BACK of the fabric from one point to the opposite. This is the first step in a commonly used technique for making 2 half-square triangles at once.


Place your log cabin block together with one of the non-log cabin blocks (right sides together). Your drawn line should be facing up.


Pin these together so they don’t shift while sewing.

Next, sew a quarter-inch seam on EACH side of the line. That means you’ll sew 2 lines down the diagonal of the squares, each a quarter-inch from the center line.

Once you’ve sewn those two lines, return to your cutting mat and cut along the original line you drew.



This leaves you with two half-square triangle/log cabin blocks! Press the seams open to reduce bulk, and repeat for the remaining blocks. Using a clear ruler and rotary cutter, trim each block to be 6.5 inches square.


Once you have all your HST/LC blocks made, arrange them in a pattern that is pleasing to your eye. I have been loving all of the crazy HST quilts out there, so I arranged mine somewhat randomly, and that’s what I’ll ask the members of my bee to do, too.


Sew the 2 pairs of blocks together using a SCANT quarter-inch seam. I find this matters quite a bit when trying to keep the blocks at 12.5 inches when you are done making them– a generous quarter-inch seam will make your blocks end up being a little short of the 12.5 inch mark. Press the seams open, then pin the sets and sew again to make a block that encompasses all of your HST/LC blocks.

There are so many possibilities for this block– you could match up 2 log cabins to make half-square triangles for a scrappier look. You also could use fewer log cabins interspersed in your blocks for a calmer look that still delivers some visual interest. If you look closely, in one of my blocks I used 3 half log cabins, and used a “regular” half square triangle to break things up. There are also a number of other ways that these blocks could be constructed, I simply found this to be the easiest way for me.


I can’t wait to see what my friends in my sewing circle make, and if you make anything using this tutorial I’d love to see it!


Read Full Post »